Tilemaster Anti-Fracture Mat is an uncoupling / decoupling mat designed for use on floor tile installations to prevent substrate lateral movement from cracking the tiled finish. Tilemaster Anti-Fracture Mat can be used in a wide range of applications to absorb lateral movement from substrates and to bridge stress / shrinkage cracking in substrates to prevent such movement being transferred to the tiled finish. The matting can be used when installing a large variety of tiles including ceramic, porcelain and natural stone tiles. Tilemaster Anti-Fracture Mat is ideal for domestic and commercial applications in light, medium and heavy duty environments.
Advantages
Three layer Uncoupling / Decoupling Mat designed to accommodate & absorb lateral movement in sub-floors
Prevents substrate lateral movement from cracking the tiled finish
Ideal for timber substrates
Ideal for underfloor heating systems - both electric and water based systems
Can be tiled over immediately after fitting the mat
Less than 1mm thick - minimises height build up
Cuts costs and uses less adhesive than cavity mats - approximately 30kg less per 20 metre roll
Simply butt-joint, no need to overlap or use jointing tape
Use below ceramic, porcelain and natural stone tiles
Surface / Substrate
Sand/Cement Screed
Concrete
Plywood Overlay
Electric Underfloor Heating
Water/Wet System
Underfloor Heating
Tile Backer Boards
Tile on Tile
Flooring Grade Asphalt & Bitumen
Anhydrite Screeds
Fibre Cement Sheet
T & G Floorboards
Floating Floors
Existing Vinyl Tiles
Steel/Metal Surfaces
Fibreglass